OFFSEC · Offensive Security

Check Point gateways: PHP2Shell plus a Gaia root flaw put ESXi in reach

Attackers chained the PHP2Shell flaws with a new Gaia OS privilege escalation, CVE-2026-123039, to take root on unpatched Check Point gateways, implant a backdoor and, in some cases, wipe ESXi hosts. The November Jumbo Hotfix closes both, but does not remove an existing compromise.

Check Point Security Gateways running the Mobile Access portal were compromised between 30 October and 4 November 2026 through a two-step chain: the PHP2Shell remote code execution flaws for entry, then a previously unknown Gaia OS privilege escalation, CVE-2026-123039, for root [1][3]. Check Point says it observed active exploitation against “a couple of dozen customers” [2]. In a limited number of cases the intrusion ended in destructive activity on a VMware ESXi host [1][3]. CISA added CVE-2026-123039 to its Known Exploited Vulnerabilities catalogue on 13 November [6][10].

The important point for defenders is timing. Check Point had shipped the PHP2Shell hotfix on 23 October, a week before the first wave [1][4]. The organisations that were compromised were, in Check Point’s words, unpatched systems [1]. Patching now closes both doors, but it does not evict an attacker who already holds root on the appliance.

What the advisories say

CVE-2026-123039 sits in the DynamicCLI service. The dynamic_server process runs as root and listens on a local control socket created world-writable, without authenticating the process on the other end [2][7]. Check Point scores it CVSS 7.8 [2]. It is local only: an attacker needs code execution on the appliance first, which is the job PHP2Shell did in this campaign [2][9].

Sources differ on scope. The vendor blog table lists R82.20, R82.10, R82 and R81.20 as affected [1]. The support article sk1000362 adds R81.10 and R81, both end of support with no fix, and names Force Firewalls, Management and Log Servers, Multi-Domain Security Management and Log Server, and Maestro Orchestrator [2]. Spark Firewalls and Smart-1 Cloud are not affected [2]. Readers should treat sk1000362 as authoritative.

Fixes for CVE-2026-123039 ship in the November Jumbo Hotfix Accumulator: R82.20 Take 14, R82.10 Take 52, R82 Take 132 and R81.20 Take 174, or later [2]. Those are the same takes that carry the PHP2Shell fix for Force Firewalls [4]. The fix blocks and logs unauthorised DynamicCLI calls [2].

PHP2Shell, CVE-2026-109618 and CVE-2026-109619, is scored 9.2 by Check Point [4]. Its exposure is wider than the Mobile Access portal. sk1000302 lists Remote Access VPN with SSL Network Extender, SAML realm authentication, the Identity Awareness Captive Portal, the UserCheck portal and Zero Phishing as affected features, along with Spark Firewall builds [4]. Management and Log Servers are not affected by PHP2Shell [4].

The same release fixes two further Gaia issues. CVE-2026-107484 (CVSS 7.3) lets an authenticated non-administrative user reach elevated command execution through Gaia Portal backend handlers [5]. CVE-2026-120490 (CVSS 3.8) is a management-to-gateway privilege boundary bypass [1]. Check Point lists neither as exploited [1]. The blog and sk1000291 disagree on whether R82.20 is affected by CVE-2026-107484; the support article says it is not [1][5].

What the attackers did with root

Check Point Research describes the post-exploitation chain in detail [3]. After escalating to root, the operator planted PHP webshells disguised as portal template files, then launched a Linux implant Check Point calls TSGA, running as slot_CPconfigdaemon, with an embedded proxy component, TSProxy [3]. TSGA provides encrypted remote access, copies the firewall configuration, persists through backups and snapshots, and tampers with binary firewall logs [3]. TSProxy is loaded into existing appliance processes to carry attacker traffic [3].

In the first wave, which targeted Israeli organisations, the operator ran the open-source gogo scanner, moved over SSH to an ESXi host using the vpxuser service account, and executed a wiper named destroy_v6 [3][8]. A note referencing “Dream Security Ltd.” rejected ransom negotiations [3][8]. The second wave, from 2 November, hit organisations in multiple countries and sectors with no destructive activity reported [3]. Check Point Research found no clear sector preference and described the activity as opportunistic [3].

Attribution is unresolved. Check Point Research assesses TSGA and TSProxy as modified variants of PhiliKit, sharing code, configuration and cryptographic material [3]. ESET previously assessed PhiliKit as part of UNC5221’s SPAWN toolset targeting Ivanti VPN appliances [13]. Check Point Research states that “the evidence does not allow us to assess with high confidence the true nature of this operation” and raises the possibility of a false flag or an access broker handing off to another actor [3].

What it means

This is a perimeter appliance used as a staging point into the virtualisation layer. The gateway held SSH reachability to ESXi, and the attacker used it [3][9]. An implant that edits the gateway’s own logs also undermines the evidence teams would normally use to scope the incident [3].

The local-only rating understates the risk. On an internet-facing gateway, any code execution flaw in a portal component becomes a root compromise while CVE-2026-123039 remains open [2][9]. Teams that deferred the October PHP2Shell hotfix are in the exposure window that was exploited.

Secondary trackers citing the KEV entry report a federal remediation due date of 16 November 2026 and ransomware use marked unknown [11][12]. Rescana notes that CVE-2026-107484 is not in KEV [11]. The CISA catalogue itself could not be retrieved for this analysis, so those details should be confirmed against the live entry.

What to do

  • Install the November Jumbo Hotfix on every Management Server and Security Gateway, starting with internet-facing Mobile Access deployments [1][2].
  • Confirm the PHP2Shell fix is present on any gateway exposing a portal feature listed in sk1000302, not only Mobile Access, including Spark Firewalls [4].
  • Where patching must wait, stop dynamic_server and prevent restart using the dbset procedure in sk1000362. This breaks the Dynamic CLI commands listed in sk144112 [2].
  • Plan replacement or upgrade for R81 and R81.10 gateways. sk1000362 lists no fix for those releases [2].
  • Review /var/log/dynamicCli.log on each gateway and cluster member for commands lacking the standard Clish wrapper and for use of the system() sink, as described in sk1000362 [2].
  • After patching, verify the socket permissions match the expected 0660 root:config state and watch for “Rejected connection from unauthorized uid” entries, then correlate bursts with portal and authentication logs [2].
  • Hunt for the vendor indicators: PHP session files containing upload_progress_pwn, a binary or process named CPconfigdaemon, scanner or wiper tools under /tmp, and unexplained gaps in firewall traffic logs [1][8]. Check Point warns that absence of a match does not rule out compromise [1].
  • Restrict Gaia Portal and Clish access with Host Access settings, the mitigation sk1000291 gives for CVE-2026-107484 [5].
  • Check whether gateways can initiate SSH to hypervisors. Remove that path where it is not required, and ship gateway logs off-box so on-device tampering cannot erase them [3][9].
  • Treat a confirmed hit as an appliance compromise. Patching does not remove an existing foothold; rebuild affected systems from trusted images [9][11].

Domain close

The pattern is familiar from Ivanti and other edge devices: a perimeter appliance with root-level services exposed to local users, a web component that yields code execution, and a short gap between fix and mass exploitation [3][13]. The Check Point case adds two lessons. The privilege boundary inside the appliance mattered as much as the internet-facing bug. And the operator went for the hypervisor, not the data. Defenders should audit what their firewalls can reach, not only what can reach them.

Sources

Every R3KONX article cites its primary material. 13 sources, in order of first citation. Links open the original publication.

  1. Security advisory: active exploitation of PHP2Shell and local privilege escalation Check Point Software (blog) · 2026-11-12
  2. sk1000362: Local privilege escalation to root in the DynamicCLI process via a local world-writable control socket (CVE-2026-123039) Check Point Support Center · 2026-11-12
  3. PHP2Shell exploitation on Check Point gateway Check Point Research · 2026-11-12
  4. sk1000302: Check Point response to CVE-2026-109618, CVE-2026-109619, CVE-2026-115560 Check Point Support Center · 2026-11-12
  5. sk1000291: CVE-2026-107484 - Input validation vulnerability in Gaia Portal backend handlers Check Point Support Center · 2026-11-12
  6. Check Point security advisory (AV26-1154) - Update 1 Canadian Centre for Cyber Security · 2026-11-13
  7. Check Point warns of zero-day flaw exploited for root access BleepingComputer · 2026-11-13
  8. Check Point gateways hacked via PHP2Shell to deploy VMware ESXi wiper BleepingComputer · 2026-11-13
  9. The firewall becomes the foothold: Attackers turn Check Point gateways against customers CSO Online · 2026-11-13
  10. CISA warns of Check Point 0-day vulnerability exploited to gain root access Cyber Security News · 2026-11-13
  11. Check Point Gaia CVE-2026-123039: exploited DynamicCLI root escalation added to CISA KEV Rescana · 2026-11-13
  12. CVE-2026-123039: Root privilege escalation in Gaia OS nFlo · 2026-11-13
  13. ESET APT Activity Report Q4 2025-Q1 2026 ESET (WeLiveSecurity) · 2026-05-28

Researched and written by the R3KONX Analysis Desk from the primary material cited below. The CISA KEV catalogue page and NVD record could not be retrieved at time of writing; KEV due-date details are taken from secondary trackers and should be checked against the live entry. Attribution reflects Check Point Research and ESET assessments only. Corrections: event@r3konx.asia.

R3KONX 2027

Work in this domain? So does the programme

4–6 May 2027, World Trade Centre Kuala Lumpur. Curated talks, hands-on training and The BattleGrid.